Phone: 800-257-5183 Web: www.campbellmfg.com Fax: 610-367-5675 Email: [email protected] Monoflex Product Catalog Material PVC Clear piping is produced from a rigid, virgin Polyvinyl Chloride (PVC) compound with a Cell Classification of 12454 per ASTM D1784. This material enables the clear piping to safely carry a maximum service temperature of 140°F when appropriate temperature/pressure de-rating factors are applied. In addition to exhibiting desirable physical properties and optimum transparency, this material complies with the provisions of Title 21 of the United States FDA Code of Federal Regulations, and is safe for use in food contact applications. Clear PVC pipe provides the same reliable chemical resistance properties that PVC piping has demonstrated over the years. In general, it is resistant to most acids, bases, salts and oxidants. Detailed chemical resistance data is available and should be referenced for proper material selection. Since this material is a nonconductor, it is not subject to electrolytic or galvanic corrosion. This material is compatible with standard PVC pipe, fittings, valves, and flush thread screens and casings, and can be incorporated into existing PVC systems via the solvent cement joining process, or threaded together using ASTM F-480 threads. In addition to a full line of clear fittings for most applications, an endless array of standard PVC components and accessories is readily available. Product Ratings Clear PVC pipe is manufactured to Schedule 40 IPS dimensions in 1/4” through 10” diameters, and Schedule 80 IPS dimensions in 1/4” to 6” diameters. This provides sufficient wall thickness for most pressure applications without jeopardizing clarity. As a rigid PVC piping, clear PVC maintains its integrity in harsh environments. It is suitable for use in industrial, food service, and environmental applications. Flush thread piping is non-pressure rated. Refer to the table below for dimensions, tolerances and pressure ratings for Sch. 40 non-threaded pipes. Please call for Schedule 80 specifi- cations. Property Value Test Method Cell Classification 12454 ASTM D1784 Specific Gravity 1.337 g/cm3@73°F ASTM D792 Tensile Strength 7094 psi @ 73°F ASTM D638 @ yield Modulus of Elasticity 435,000 psi ASTM D638 Izod Impact .76 ft-lbs / inch ASTM D256 notch @ 73°F Coefficient of Linear 3.77 x 10-5in / in °F ASTM D696 Expansion Flammability V-O UL-94 Hardness, Shore D 76 + 3 ASTM D2240 Physical Properties De-rating Factor Operating Temp. (°F) De-rating Factor 73 80 90 100 110 120 130 140 1.00 .88 .75 .62 .51 .40 .31 .22 These temperature de- rating factors are to be multiplied by the pressure ratings listed to determine the maximum pressure rating of the system at elevated temperatures. Nominal Nominal Pipe Average Minimum Weight Max. W.P. Size (in.) O.D. I.D. Wall Lbs./ft. PSI* 1/4 .540 .354 .088 .081 390 3/8 .675 .483 .091 .109 310 1/2 .840 .608 .109 .161 300 3/4 1.050 .810 .113 .214 240 1 1.315 1.033 .133 .315 220 1-1/4 1.660 1.364 .140 .426 180 1-1/2 1.900 1.592 .145 .509 170 2 2.375 2.049 .154 .682 140 2-1/2 2.875 2.445 .203 1.076 150 3 3.500 3.042 .216 1.409 130 3-1/2 4.000 3.520 .226 1.697 120 4 4.500 3.998 .237 2.006 110 6 6.625 6.031 .280 3.535 90 6 x1/8† 6.625 6.355 .125 1.647 45 8 8.625 7.943 .322 5.305 80 10 10.750 9.976 .365 7.532 70 Sch. 40 Dimensions and Pressure Ratings * Pressure ratings shown are for water, non-shock @ 73°F † This size does not meet Schedule 40 criteria. CLEAR PVC PIPE, FITTINGS AND VISUALLY CLEAR FLUSH THREAD CASING Page 34
